We uses cookies and other technologies so that we can improve your experience on our site. Read our Cookie Policy. Got It!
Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2017 Ultra Limited

1 - 20 of 50
  • $ 501.26
    $ 501.26

    Shaped by the wind, this Custom Auxiliary Lighting Kit follows contours of the triple tree and headlamp shell for a custom look.

    • Gloss black finish
    • Brackets serve as stylized mounting points for passing lamp and turn signal housings
    • Eliminates cross brace and flat side supports of traditional auxiliary lamps
    • Kit includes passing lamp housings, retaining rings, mounting brackets, auxiliary lamp switch and mounting hardware
    • Auxiliary Lamp Bulbs sold separately
  • $ 40.74
    $ 40.74

    Harness plugs into accessory connector to provide 12-volt power leads. Required to install Heated Grips, XM® Radio, Cruiser Amp & Speaker Systems, zumo GPS, Digital Oil Pressure Gauge, Garage Door Opener Kits, Heated Seats, decorative lighting or other electrical accessories.

    • Plugs into accessory connector
    • Ability to provide 12-volt power leads
  • $ 233.10
    $ 233.10

    Smoked lenses hide bands amber LED lamps that glow as running lamps when the ignition is on, and the two outer clusters function as auxiliary directional indicators when the turn signals are activated.

    • For an integrated and stylish way to add high-mounted running and turn lights to your Touring model
    • Wiring is concealed inside the fairing for a clean, custom appearance
    • Complete kit includes all necessary mounting hardware
  • $ 349.70
    $ 349.70

    Keep your cool on a sweltering summer day. Engineered to maximize rider and passenger comfort in high temperature situations, the CoolFlow Fan is the perfect addition if your bike is subjected to parade duty, rush hour traffic, or extreme temperature environments. Unlike traditional fan kits that try to cool the engine by blowing air across the cylinders and often onto your legs, the CoolFlow Fan keeps the riders comfortable by drawing the heated air away from the rear cylinder and exhaust pipe, and directing it toward the ground.

    • Features switched On/Off/Auto operation
    • In the “ON” mode, the fan is active at low speeds, and will turn off when the bike reaches 40mph
    • As speed lowers, the fan turns back on at 35mph -this gap is intentional to prevent the fan from cycling on and off during low speed changes
    • In the “AUTO” setting, the fan operates based on a combination of slow vehicle speed and specific engine and ambient temperatures
    • 100% waterproof
    • Includes everything needed for installation & replacement right side Mid-Frame Air Deflector
    • Fan operation is indicated in the odometer
    • Dealer Digital Technician update is required
  • $ 349.70
    $ 349.70

    This low-profile oval air cleaner features an exposed filter element and a cast back plate designed to provide maximum air flow to the throttle body.

    • Gloss black
    • Easy to install
    • Produces significant performance gains, while the stylish cover is tapered for added leg clearance
    • Includes low-profile air cleaner cover, high-flow filter element, cast aluminum back plate, diamond-cut Screamin’ Eagle medallion, and all required installation hardware
    • Protective Rain Sock P/N 29400177 or 29762-09 is available separately
    • All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
    • ECE 50-State U.S. EPA compliant
  • $ 46.58
    $ 46.58

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 501.26
    $ 501.26

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Offers plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Complements almost any customizing style
    • Includes left and right boards
  • $ 373.01
    $ 373.01

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Offers plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Complements almost any customizing style
    • Includes left and right boards
  • $ 81.55
    $ 81.55

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
    • Complements almost any customizing style
    • Easy to install
  • $ 670.30
    $ 670.30

    Transform your Electra Glide® model for around-town cruising.

    • Gloss black
    • Includes everything needed to convert the rigid-mount Tour-Pak® luggage to an easy on-and-off detachable version
    • Complete kit includes Docking Hardware Kit, H-D® Detachables™ Two-Up Tour-Pak® Mounting Rack, AM/FM Antenna Relocation Kit, License Plate Relocation Kit and Red Lens Electra Glo™ LED Saddlebag Run/Turn/Tail Lamp Kit
  • $ 157.34
    $ 157.34

    This forged and machined Defiance Air Cleaner Trim kit adds a premium touch to the Milwaukee-Eight Ventilator Air Cleaner.

    • Gloss Black anodized finish
    • Billet aluminum band with deep longitudinal lines and “H-D®” logo wraps the center section of the Ventilator Air Cleaner face plate for a contemporary look
    • Includes trim band and mounting hardware
    • Protective Rain Sock P/N 29400177 or 29762-09 is available separately
  • $ 128.19
    $ 128.19

    These easy-to-install slash cut end caps allow you to finish your 4.5" Screamin’ Eagle Street Cannon mufflers your way.

    • Chrome finish
    • Installation hardware included
    • Sold in pairs
  • $ 349.70
    $ 349.70

    Designed for installation in the Original Equipment fairing lowers of Twin-Cooled Touring models, these vibration-tested waterproof two-way speakers feature rider directed tweeters for clear, crisp sound.

    • 4” bass/midrange driver and the grill-mounted 1” tweeter are performance-optimized to complement the sound characteristics of both Stage I and Stage II Boom!™ Audio systems
    • Provides higher listening volumes with reduced distortion at highway speeds
    • For easy installation, the speakers are pre-mounted to a backing plate that snaps in place, replacing the fairing lower cooling system access doors
    • Speakers can be easily removed to check coolant levels.
    • Includes left and right two-way speakers and wiring harness
    • Speakers feature two-year warranty
  • $ 816.03
    $ 816.03

    Add more Boom!™ to your bike. This kit permits the addition of a third or fourth pair of speakers to your Boom!™ Audio-equipped Touring bike. Choose a combination of Boom!™ Audio Fairing Lower Speakers and/or Rear Speaker Pods (sold separately) to build a sound system custom-designed to your audio demands. System also provides speaker fade capabilities between fairing and non-fairing mounted speakers for highway riding, when it’s needed most.

    • Saddlebag Mounted
    • Ensure maximum output of your audio system with the recommended High Output Charging System P/N 29900028A
    • Use of the Boom!™ Audio Amplifier turns off the radio's internal amplifier
    • Includes 75-watt/channel (300-watts total) saddlebag-mounted amplifier, amplifier cover, mounting bracket and the required installation hardware and wiring harness
  • $ 816.03
    $ 816.03

    Upgrade your black and chrome Milwaukee-Eight motor to the sinister look of gloss black. These richly finished engine covers start your bike on its journey to the dark side.

    • Manufactured from Original Equipment components
    • Critical gasket surfaces are masked to provide a good sealing surface with the engine
    • Six-piece kit includes the primary cover, cam cover, upper rocker box covers, transmission side cover and transmission top cover
    • Rocker box lower housings are available separately
  • $ 1,165.81
    $ 1,165.81

    Fill the air with sound from this Boom!™ Audio Boom Bagger Kit. This complete audio kit provides the latest in Harley-Davidson® audio components. When installed, the increased power of the amplifier provides the speakers with a clean signal, and a custom equalization is available to further optimize the performance of the Boom!™ Audio speaker system.

    • 4-Speaker Ultra Boom!™ Bagger Kit
    • Ensure maximum output of your audio system with the recommended High Output Charging System P/N 29900028A
    • Dealer Digital Technician software update is required
    • Dealer installation is recommended
    • Kit includes Boom!™ Audio 6.5" fairing speakers, Boom!™ Audio 4-channel fairing-mounted amplifier, amplifier mount and wiring harness
    • Speakers feature two-year warranty
    • Stop by a participating dealer to interact with a unique audio display that lets you simulate how your bike will sound with Boom!™ Audio upgrades. Contact your local dealer for details
  • $ 466.28
    $ 466.28

    Boom!™ Saddlebag Speakers provide two powerful rear speakers, directed at the rider for concert sound. Saddlebag mounted speakers increase the available sound pressure level, and produce higher listening volume, lower distortion, and improved clarity at highway speeds.

    • Pair of 5" x 7" waterproof 2-ohm full range speakers feature high strength woofer cones and suspended 25mm tweeters that are directionally optimized for improved rider acoustics
    • Speakers fit seamlessly in custom-designed saddlebag lids (sold separately), and are covered by stylish and durable performated metal speaker grills
    • Extensively tested to withstand the harshest riding conditions
    • Kit includes left and right speakers, grills, rear wiring harness, and installation hardware
    • Saddlebag lids sold separately
    • Speakers feature two-year warranty
  • $ 104.86
    $ 104.86

    Grab the attention of the traffic around you. LED Turn Signal Inserts feature a single bright, fast-acting amber LED lamp sealed in a waterproof housing. The multi-faceted reflector amplifies the light, and the focused lens spreads the light across the lamp’s surface.

    • Amber LED Insert
    • Drop-in lamp assembly replaces the bulb and reflector in the stock bullet turn signal housing for a simple on-bike installation
    • Included plug-in harness and crimp connectors attach directly to the existing turn signal wiring
    • Installation does not require a control box or load equalizer for correct operation
    • Kit includes 2 LED modules, 2 wiring harnesses, and crimping connectors
    • Customize the look with your choice of outer lens cover colour
    • Lenses sold separately
    • Amber Inserts are DOT and ECE compliant
  • $ 15.11
    $ 15.11

    Add a unique touch to your bike with these lenses.

    • Smoked Lenses
    • Replaces the Original Equipment lenses when you install LED Bullet Turn Signal Inserts P/N 67800639 or 67800640
    • Available in amber, clear, smoked and red to match your style or functional needs
    • Kit contains 2 lenses
    • ECE/DOT compliant with Amber insert
    • DOT compliant with Red insert
  • $ 64.06
    $ 64.06

    The gloss black Fuel Tank Console Door is the perfect match for the Gloss Black Console Kit.

    • Replaces the Original Equipment fuel door
    • Reuses Original Equipment mounting hardware
    • Easy to install
1 - 20 of 50

Harley-Davidson® Parts

Narrow Your Search

Lens Colour