Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2019 Fat Boy 2

With chrome for miles, fat apes, and a muscular stance, this Fat Boy is ripped and ready to roll with the punches.

1 - 20 of 32
  • $ 59.69
    $ 59.69

    The ideal choice for maximum versatility, this complete kit contains the docking hardware necessary to install all HoldFast™ detachable accessory options. Even if you only install a passenger backrest today, this kit allows you to add additional accessories as your touring demands change.

    • Chrome finish
    • Allows you to add additional accessories as your touring demands change
    • Includes docking points to allow installation of H-D® Detachables Sissy Bar, Solo Luggage Rack, Two-Up Luggage Rack, Solo Tour-Pak® Rack or Two-Up Tour-Pak® Rack
  • $ 191.11
    $ 191.11

    Dare to be bold. Dressed in luxurious chrome, this complete collection of engine covers raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D® logo, the Chrome Defiance Collection design imparts a feeling of forward motion to the bike’s profile.

    • Chrome finish
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Machined to fit the new Accessory Softail® Narrow Profile Primary Covers
    • Add the complete collection, or start with one component and build your custom ride
  • $ 101.50
    $ 101.50

    Brilliant chrome accents for the upper fork legs. Perfect for finishing off that chromed front end look. When used with H-D® Genuine Motor Accessory Chrome Lower Fork Sliders, you’ve got a front end that’s completely chromed and an appearance that’s utterly impressive.

    • Chrome finish
    • Includes left and right covers
  • $ 358.38
    $ 358.38

    Clean smooth covers, subtle top-stitching, and a frame-hugging profile add up to a statement only Harley® could create. The low design delivers a reduced seat height that is ideal for riders that want the shortest possible reach to the ground and the long and lean shape allows tall riders to move back from the hand and foot controls without sitting higher on the bike.

    • Reduced seat height, ideal for riders wanting the lowest possible ride
    • Seat is wrapped in water-resistant vinyl
    • Finished with an embroidered Harley-Davidson® script
    • Includes grab strap and mounting hardware
    • Seat width 12.5"; passenger pillion width 6.0”
  • $ 334.48
    $ 334.48

    This beefy 16” Fat Ape Handlebar is shaped to give even the tallest rider the hands in the air riding position.

    • Chrome finish
    • Features a flatter hand position that positions your wrists in a neutral position for long ride comfort
    • Can be installed in the Original Equipment risers on models factory-equipped with 1.25” handlebars
    • Pre-drilled to allow internal wiring
    • See Guides tab for additional components required for installation
  • $ 358.38
    $ 358.38

    Take your Fat Boy model in a new styling direction, this kit is just the start on your journey to build a one-of-a-kind custom ride.

    • Chrome finish
    • Manufactured from Original Equipment components for a perfect fit
    • Direct replacement for the stock satin chrome nacelle
    • Add matching lower fork sliders, upper fork slider covers and axle nut covers to complete the conversion
    • 3-piece kit includes nacelle housing and two back panels
  • $ 358.38
    $ 358.38

    Dress up your ride. Designed in the style of the Fat Boy® model’s console with perforated tank strap, this mirror chrome finished Console Kit includes the major components required to change the console to a bright custom look.

    • Chrome finish
    • Instantly transforms the view over the tank
    • Manufactured from Original Equipment components for superior fit and finish
    • Includes polished instrument console, tank strap, console insert, required wiring adapter and installation hardware
    • Easy to install
  • $ 191.11
    $ 191.11

    Add a traditional heel-toe shift action and a contemporary new look. These Billet Style Shift Levers are forged from aluminum, then machined and polished for a beautiful, custom finish.

    • Chrome finish
    • Includes a front and rear lever and chrome hardware
  • $ 167.21
    $ 167.21

    Continue the chrome theme with these Hand Control Levers. Cast from aluminum, these levers feature a custom finish designed to match the accessory chrome hand controls or complement Original Equipment-style black components.

    • Chrome Finish
    • Clutch anti-rattle clip and new pivot bushing included
  • $ 215.00
    $ 215.00

    This Billet Style Rear Brake Lever is forged from billet aluminum, then machined and polished for a beautiful, custom look.

    • Chrome finish
    • For footboards
    • Matches the length of the Original Equipment lever found on FL Softail motorcycles
    • Brake pedal pads sold separately
  • $ 477.85
    $ 477.85

    Replace your stock painted aluminum controls with brilliant chrome, without compromising quality. When combined with Chrome Switch Housing Kit, Chrome Switch Caps and other Harley-Davidson® Genuine Motor Accessories, this front brake control kit provides a look that does more than stop your bike – it can stop traffic.

    • Chrome Finish
    • Manufactured from Original Equipment components
    • Includes a Chrome Master Cylinder Cover
  • $ 23.84
    $ 23.84

    Required for installation of accessory Front Axle Covers on hollow-axle ’18-later Softail models.

    • For use on '18-later Softail models
    • Includes threaded axle spacer, left and right adapters and all hardware
  • $ 35.79
    $ 35.79

    Cover the front axle in style. The rich satin chrome finish of these Front Axle Covers is the perfect match for the satin-finished components on the “18 Fat Boy model, and a great complement to Original Equipment polished or blacked-out fork sliders as well.

    • Satin Chrome Finish
    • Includes all necessary mounting hardware
    • Easy to install
    • Sold in pairs
  • $ 35.79
    $ 35.79

    Cover your rear axle nut in the most traditional way. These rear axle covers fit into the recessed eye of the swingarm, and the low profile design allows installation without removal of the mufflers.

    • Satin Chrome Finish
    • Includes necessary mounting hardware
    • Easy to install
    • Sold in pairs
  • $ 537.59
    $ 537.59

    Competitively-priced, these chrome-plated Lower Fork Sliders give your bike upfront style. To ensure proper fitment and function, these sliders are manufactured from Original Equipment components. Form follows function, with polished, chrome-plating and a stamped Harley-Davidson logo for product identification.

    • Chrome Finish
    • A perfect addition during the installation of Profile Low Front suspension components
    • Includes right and left sliders, bottom axle retainer, axle retainer bolts and oil seals
  • $ 298.64
    $ 298.64

    Complete the custom transformation by replacing the stock painted footboard brackets with brilliant chrome.

    • Chrome finish
    • Perfect complement to custom footboards
    • Manufactured with Original Equipment components for proper fit
    • Polished and plated to a brilliant finish
    • Includes chrome mounting hardware
  • $ 477.85
    $ 477.85

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome Finish
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance while offering plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Surrounded by deep grooves and a contemporary H-D logo
    • Includes left and right boards
  • $ 155.26
    $ 155.26

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome Finish
    • Features rich textured black rubber traction surfaces set in a field of mirror chrome
    • Includes a stylized H-D logo for a modern sleek look
  • $ 71.63
    $ 71.63

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome Finish
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
  • $ 101.50
    $ 101.50

    Dress the oil cooler in style. The cover fills the area between the frame downtubes for a complete custom look, without disturbing the airflow across the cooler’s surface. This Oil Cooler Cover replaces the plastic surround, and because it hugs the contours of the cooler body, it does not interfere with engine guard installation.

    • Gloss black finish
    • Easy-to-install
    • Includes all required mounting hardware
1 - 20 of 32

Harley-Davidson® Parts

Narrow Your Search

Lens Colour